How to Fillet & Pan Dress Panfish (video)

Angler standing a fillet station filleting panfish

Panfish are exactly what their name implies — fish small enough to fit in a pan — a frying pan, that is. Among these are such beloved species as bluegills, crappie, redear sunfish, redbreast sunfish and white bass, and lesser-known yet locally popular fish like yellow bass, rock bass, warmouths, longears, spotted sunfish and green sunfish. None of these fish gets very big — a few pounds tops, usually only a few ounces. But as a group, they're among the most popular, most commonly caught fish in the U.S.

Table with Panfish and Fillet Panfish kit
Everything you need for filleting and pan-dressing panfish.

Panfish are great fun to catch and delicious to eat. Before the eating begins, however, anglers must know how to properly prepare their catch for the table. Two basic ways — filleting and pan-dressing — are commonly used, both of which are illustrated in this article.

Tools you need include a sharp knife (fillet knife, electric fillet knife and/or plain blade); a cutting board, fillet board like the Bass Pro Shops hardwood fillet board or other hard, flat surface (use plastic or glass to reduce bacteria); a spoon or fish scaler, if you're pan-dressing the fish; a container in which to place the prepared fish; and some newspaper, a trash bag or a bucket for disposal of waste parts. Also recommended is household bleach for clean-up.

Bass Pro Shops Rubber Handled Fish Scaler
Bass Pro Shops Rubber Handled
Fish Scaler

After the fish are cleaned, they can be cooked and eaten, or you can store the fillets or pan-dressed fish in the freezer until you're ready to prepare them. To avoid freezer burn and preserve freshness, it's best to immerse the prepared fish in water when you freeze them (either in zip-seal plastic freezer bags or plastic containers) or better yet, to vacuum-seal them. Be careful that the sharp fins on pan-dressed fish aren't positioned in such a way that they could puncture the wrapping or container.

Tip: Watch video: How to Fillet a Panfish by Cabela's Cooking

How to Fillet a Panfish

Nowadays it seems most people prefer to fillet their catch to produce boneless, skinless pieces of meat ready to cook. Here's how to do it, quick as a snap, with an electric or fixed-blade fillet knife.

Step 1

Lay the fish on a cutting board, fillet board or other flat, hard surface. Grasping the fish's mouth, take the fillet knife and position it just behind the side (pectoral) fin. Slice downward to the backbone, keeping the rear of the knife blade up. Be careful not to cut into the fish's backbone.

FilletPanfish1

Step 2

Turn the knife blade toward the tail and continue cutting, staying on top of the back and belly fins. You'll feel resistance as you cut through the rib cage, but be careful not to cut into the backbone. It's better to cut too shallow than too deep. Continue your cut toward the tail, until you have almost, but not quite, cut the scaly fillet off.

FilletPanfish2

Step 3

With the fillet barely attached to the tail, flip it away from the fish. Position your knife on the narrow portion of the fillet, and while holding the fish, slice between the meat and the skin to remove the fillet. To obtain the maximum meat, cut very close to the skin. When the fillet is removed, place it, with rib cage still attached, on a sheet of wax paper. Then flip the fish over and fillet the other side.

FilletPanfish3

Step 4

To finish, take each fillet, and with the tip of your fillet knife, carefully cut out the rib cage. To retrieve the most meat, angle your knife and slice close to the ribs. After you rinse the fillets, they're ready to cook or store.

FilletPanfish4

How to Pan-Dress a Panfish

Some connoisseurs prefer their fish pan-dressed — with skin, tail and bones intact — to facilitate the most thorough enjoyment of these scrumptious wild treats. They don't want to miss a single morsel, and pan-dressing eliminates the loss of the small meat pieces sometimes left behind in the filleting process. You'll have to separate meat and bone as you eat pan-dressed fish, but many panfish gourmets believe this method of preparation produces a more tasty result.

Step 1

Begin by placing the fish on a cutting board, fillet board or other hard, flat surface and scraping away all its scales with a regular table spoon or scaling tool. Scale from the tail toward the head, being certain you remove all the scales on both sides of the fish.

PanDressPanfish5a
Or use a scaling tool.
PanDressPanfish5b

Step 2

Using a sharp, heavy knife, remove the fish's head. Angle the cut from just behind the top portion of the gill cover to the rear edge of the pectoral and pelvic fins, removing these fins along with the head.

PanDressPanfish6

Step 3

Remove the entrails, rinse thoroughly with clean water inside and out, and you're finished. Leave the remaining fins, the tail and skin on. These are delicious and enhance the already wonderful flavor of the fish.

PanDressPanfish7

How to Clean and Freeze Panfish Tips

  • Beware of the sharp, spiny fins when cleaning panfish. They can cause nasty puncture wounds.
  • Always cut away from you when dressing a fish. If the knife slips, then it's less likely to cut you.
  • The common saying "A sharp knife is a safe knife" is true. The less you have to struggle or force the knife, the less likely the chance of an accident. For your safety, consider wearing a filleting glove, which protects your hands.
  • The waste created from cleaning fish can get smelly if you clean your fish on Saturday and your garbage pickup is on Tuesday. Wrap the waste in newspaper and tape it securely, then store in your freezer until garbage day to reduce offensive odors.
  • You can extend freezer life of fish by several months if you soak the fish for 20 seconds in lemon juice. The ascorbic acid in lemon juice retards spoilage by slowing the growth of microorganisms and counteracting oxidation.

Video: How to Fillet a Panfish by Cabela's Cooking